Pegasus Tech Menu:    Home    RF Products    About Us    News    Capabilities    Qualifications    Our Staff    Sample Designs    Facilities    Business Philosophy    Privacy    Warranty    Jim's Gems    The Lighter Side    Links    Contact Us Your Source for RF, Wireless, and SS Information! Search Site Search Web     The PTRF-433 Transceiver Module NOTE:  If you are interested in this module, please call Jim Pearce at (865) 717-9339. The module is no longer in production, and availability is limited. For information on our other transceiver modules, please see our RF Products page. Introduction The PTRF-433 operates in the 433 to 435 MHz band. Its design is based on the XEMICS XE1202 single chip transceiver and is capable of use in data transmission for narrowband FSK applications. In addition to the XE1202, the module incorporates a SAW filter that is used for both transmitting and receiving, a high accuracy quartz crystal, a low-loss transmit/ receive switch and all of the carefully selected passive components necessary to get the highest performance from the XE1202. The design is pre-certified to ETSI EN 300 220 and ETSI EN 301 489, and FCC part 15.231 regulations, which means that the testing that will need to be done on products incorporating this module will go much more smoothly than if you started from scratch with a design using the XE1202 integrated circuit. The PTRF-433 works in systems with an external processor. Assistance in integration, customization, firmware development or modification, and certification is available from Pegasus Technologies. Features CE Pre-Certified Radio Design Simple uP Interface Low Cost Design Production Ready Bit Synchronizer Programmable Power Output Alignment Free Optimized RF performance Few External Components Low Voltage / Low Current Reduces Design Time for your wireless product Applications Home Automation Process control Security systems Wireless data links Home appliances Wireless sensing Specifications Frequency: 433 to 435 MHz Modulation: FSK Programmable Data Rates: 4.8 kbps to 76.8 kbps Output Power: 8 dBm Receiver Sensitivity: -110 dBm, Typical (5kHz deviation, 4.8 kbps, 10-3 BER) TX Current: 35 mA @ 8 dBm, typical RX Current: 15 mA, typical Supply Voltage 2.7 to 3.6 V Regulatory Compliance: EN 300 220, EN 301 489, and FCC part 15.231 Temperature Range: -40 to +85 degrees C Module Size: 52 mm x 29 mm For a complete overview of the operation of this module, refer to the datasheet for the XE1202 transceiver integrated circuit. Specifications subject to change without notice. For a downloadable/printer friendly copy of this spec sheet, select one of the links below: MS Word Version (~302K) PDF version (~50K) For pricing, see our RF Products page. For more information, email Sales@pegasustech.com or call Jim Pearce at (865) 717-9339. This site copyright © 2000 - 2009 by Pegasus Technologies, Inc.  All rights reserved. Tel: 865-717-9339    ||   FAX: 865-717-9904    ||   E-Mail: sales@pegasustech.com 108 Pawnook Farm Road   ||   Lenoir City, TN 37771